Hao4K影音

网宅嗨网every bit amazingDolby°LM100Broadcast Loudness宅嗨网Meter User's ManualIssue 5Part Number 91846宅嗨网宅嗨网宅嗨网宅嗨网海网宅嗨网宅嗨网海网宅嗨网宅嗨网宅嗨网宅嗨宅嗨宅嗨宅嗨Dolby Laboratories,Inc.Corporate HeadquartersDolby Laboratories,Inc.100 Potrero AvenueSan Francisco,CA 94103-4813 USATelephone 415-558-0200Fax415-863-1373宅嗨网www.dolby.comEuropean HeadquartersDolby Laboratories,Inc.Wootton BassettWiltshire SN4 8QJ EnglandTelephone 44-1793-842100Fax44-1793-842101网宅嗨网DISCLAIMER OF WARRANTIES:EQUIPMENT MANUFACTURED BY DOLBY LABORATORIES IS WARRANTED AGAINST DEFECTSIN MATERIALS AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM THE DATE OFPURCHASE.THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES AND NO WARRANTYOF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,OR OF NONINFRINGEMENTOF THIRD-PARTY RIGHTS INCLUDING,BUT NOT LIMITED TO,COPYRIGHT AND PATENTRIGHTS).LIMITATION OF LIABILITYIT IS UNDERSTOOD AND AGREED THAT DOLBY LABORATORIES'LIABILITY,WHETHER INCONTRACT,IN TORT,UNDER ANY WARRANTY,IN NEGLIGENCE,OR OTHERWISE,SHALL NOTEXCEED THE COST OF REPAIR OR REPLACEMENT OF THE DEFECTIVE COMPONENTS ORACCUSED INFRINGING DEVICES,AND UNDER NO CIRCUMSTANCES SHALL DOLBYLABORATORIES BE LIABLE FOR INCIDENTAL,SPECIAL,DIRECT,INDIRECT,ORCONSEQUENTIAL DAMAGES(INCLUDING,BUT NOT LIMITED TO,DAMAGE TO SOFTWARE ORRECORDED AUDIO OR VISUAL MATERIAL),COST OF DEFENSE,OR LOSS OF USE,REVENUE,ORPROFIT,EVEN IF DOLBY LABORATORIES OR ITS AGENTS HAVE BEEN ADVISED,ORALLY OR INWRITING,OF THE POSSIBILITY OF SUCH DAMAGES.Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.Dialogue Intelligence is aPart Number 91846trademark of Dolby Laboratories.All other trademarks remain the property of their respective owners.Issue 52011 Dolby Laboratories.All rights reserved.S11/19783/24236Dolby LM100 Broadcast Loudness Meter User's ManualRegulatory NoticesFCCNOTE:This equipment has been tested and found to comply with the limits for a Class Adigital device,pursuant to Part 15 of the FCC Rules.These limits are designed to providereasonable protection against harmful interference when the equipment is operated in acommercial environment.This equipment generates,uses,and can radiate radio frequencyenergy and,if not installed and used in accordance with this instruction manual,may causeharmful interference to radio communications.Operation ofthis equipment in a residentialarea is likely to causeharmful interference in which case the user will be required to correctthe interference at his own expense.CanadaThis Class A digital apparatus complies with Canadian ICES-003EU/EMCThis unit complies with the EMC requirement of EN55103-1 and EN55103-2 when operatedin an E2 environment in accordance with this manual.This equipment complies with the EMC requirements of EN55022 and EN55024 whenoperated in accordance with this manual.Important Safety Instructions1.Read these instructions.2.Keep these instructions.3.Heed all warnings.4.Follow all instructions.网5.Do not use this apparatus near water.6.WARNING:To reduce the risk of fire or electric shock,do not expose this apparatus torain or moisture.7.Clean only with dry cloth.8.Do not install near any heat sources such as radiators,heat registers,stoves,or otherapparatus(including amplifiers)that produce heat.9.No naked flame sources,such as lighted candles,should be placed on the apparatus.10.Protect the power cord from being walked on or pinched,particularly at plugs,convenience receptacles,and the point where they exit from the apparatus.11.Only use attachments/accessories specified by the manufacturer.12.Unplug this apparatus during lightning storms or when unused for long periods oftime.13.Refer all servicing to qualified service personnel.Servicing is required when theapparatus has been damaged in any way,such as the power-supply cord or plug isdamaged,liquid has been spilled or objects have fallen into the apparatus,theapparatus has been exposed to rain or moisture,does not operate normally,or hasbeen dropped.Dolby LM100 Broadcast Loudness Meter User's Manual14.Do not expose the apparatus to dripping or splashing,no objects filled with liquids,such as vases,shall be placed on the apparatus.15.CAUTION:This equipment contains a lithium battery.Danger of explosion if thebattery is incorrectly replaced.Replace only with the same or equivalent type.Do notdisassemble,crush,puncture,short external contacts,or dispose of in fire or water.Dispose of the used battery in accordance with local law.16.CAUTION:Troubleshooting must be performed by a trained technician.To reducethe risk of electric shock,do not attempt to service this equipment unless you arequalified to do so.17.Do not defeat the safety purpose of the polarized or grounding-type plug.A polarizedplug has two blades with one wider than the other.A grounding type plug has twoblades and a third grounding prong.The wide blade or the third prong is providedfor your safety.If the provided plug does not fit into your outlet,consult an electricianfor replacement of the obsolete outlet.18.This apparatus must be earthed(grounded)by connecting to a correctly wired andearthed power outlet.19.Ensure that your mains supply is in the correct range for the input power requirementof the unit.20.In order to reduce the risk ofelectrical shock,the power cord must be disconnectedwhen the power supply assembly is removed.21.This equipment is designed to mount in a suitably ventilated 19-inch rack;ensure thatany ventilation slots in the unit are not blocked or covered.22.The mains power disconnect device for this unit is the plug-in mains cord rather thana power switch.The mains cord must remain readily accessible for disconnectingmains power.23.To avoid exposure to dangerous voltages and to avoid damage to the unit,do notconnect the rear-panel Ethernet port to telephone circuits.24.As the colours of the cores in the mains lead may not correspond with the colouredmarkings identifying the terminals in your plug,proceed as follows:The green and yellow core must be connected to the terminal in the plugidentified by the letter E,or by the earth symbolL,or coloured green,or greenand yellow.The blue core must be connected to the terminal marked with the letter N or网coloured black.The brown core must be connected to the terminal marked with the letter L orcoloured red.25.The power cord with CEE7/7 plug supplied with this unit for use in ContinentalEurope must be connected to a polarised mains socket,or the socket must be suppliedvia a residual current breaker(RCD).This power cord is not suitable for use in theUK.To use the cord in the UK cut off the CEE7/7 plug and replace with an approvedBS 1363 13A plug:The green and yellow core must be connected to the terminal in the plugidentified by the letter E,or by the earth symbol-L,or colored green,or greenand yellow.The blue core must be connected to the terminal marked with the letter N orcolored black.The brown core must be connected to the terminal marked with the letter L orcolored red.26.This apparatus must be earthed.Dolby LM100 Broadcast Loudness Meter User's Manual