Hao4K影音

WARNING:WARNINGAVISTO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK,DO NOT EXPOSE THIS APPARATUSTO RAIN OR MOISTURE.equilateral triangle,is intended to alert the user to theCAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,the product's enclosure that may be of sufficientDO NOT REMOVE COVER (OR BACK).NOmagnitude to constitute a risk of electric shock toUSER-SERVICEABLE PARTS INSIDE.REFERThe exclamation point within an equilateral triangle isSERVICING TOQUALIFIED SERVICEintended to alert the user to the presence of importantPERSONNELthe literature accompanying the appliance.Important Safety Instructions1.Read these instructions.15.Damage Requiring Service2.Keep these instructionsUnplug the apparatus from the wall outlet and refer3.Heed all warnings.servicing to qualified service personnel under the4.Follow all instructions.following conditions:A.When the power-supply cord or plug is damaged,5.Do not use this apparatus near water.B.If liquid has been spilled,or objects have fallen6.Clean only with dry cloth.into the apparatus,7.Do not block any ventilation openings.Install inC.If the apparatus has been exposed to rain oraccordance with the manufacturer's instructions.water.8.Do not install near any heat sources such as radia-D.If the apparatus does not operate normally bytors,heat registers,stoves,or other apparatusfollowing the operating instructions.Adjust only(including amplifiers)that produce heat.those controls that are covered by the operating9.Do not defeat the safety purpose of the polarized orinstructions as an improper adjustment of othergrounding-type plug.A polarized plug has twocontrols may result in damage and will oftenblades with one wider than the other.A groundingrequire extensive work by a qualified techniciantype plug has two blades and a third groundingto restore the apparatus to its normal operation,prong.The wide blade or the third prong are pro-E.If the apparatus has been dropped or damaged inany way.andvided for your safety.If the provided plug does notfit into your outlet,consult an electrician forE When the apparatus exhibits a distinct change inperformance this indicates a need for service.replacement of the obsolete outlet.10.Protect the power cord from being walked on or16.Object and Liquid Entrypinched particularly at plugs.convenience recepta-Never push objects of any kind into the apparatuscles,and the point where they exit from the appara-through openings as they may touch dangerous volt-age points or short-out parts that could result in atus.fire or electric shock.11.Only use attachments/accessories specified by theThe apparatus shall not be exposed to dripping ormanufacturer.splashing and no objects filled with liquids,such as12.Use only with the cart,stand,PORTABLE CART WARNINGtripod,bracket,or table spec-Don't put candles or other burning objects on top ofified by the manufacturer.orthis unit.sold with the apparatus.17.BatteriesWhen a cart is used,use cau-Always consider the environmental issues and fol-tion when moving the cart/low local regulations when disposing of batteries.apparatus combinationtoavoid injury from tip-over.18.If you install the apparatus in a built-in installation.8325Asuch as a bookcase or rack.ensure that there is ade-13.Unplug this apparatus during lightning storms orquate ventilation.when unused for long periods of time.Leave 20 cm (8")of free space at the top and sides14.Refer all servicing to qualified service personnel.and 10 cm (4")at the rear.The rear edge of the shelfServicing is required when the apparatus has beenor board above the apparatus shall be set 10 cm(4")damaged in any way,such as power-supply cord oraway from the rear panel or wall,creating a flue-plug is damaged.liquid has been spilled or objectslike gap for wam air to escape.have fallen into the apparatus,the apparatus hasbeen exposed to rain or moisture,does not operatenormally,or has been dropped.2PrecautionsRecording Copyright-Unless it's for personal useIf you do not use this unit for a long time,it mayonly.recording copyrighted material is illegalnot work properly the next time you tum it on,sowithout the permission of the copyright holder.be sure to use it occasionally.2.AC Fuse-The AC fuse inside the unit is not user-When you've finished using this unit,remove allserviceable.If you cannot turn on the unit.contactdiscs and turn off the power.your Onkyo dealer.Installing this Unit3.Care-Occasionally you should dust the unit all overInstall this unit in a well-ventilated location.with a soft cloth.For stubborn stains,use a soft cloth.Ensure that there's adequate ventilation alldampened with a weak solution of mild detergent andwater.Dry the unit immediately afterwards with aaround this unit,especially if it's installed in anclean cloth.Don't use abrasive cloths.thinners.audio rack.If the ventilation is inadequate,thealcohol,or other chemical solvents,because theyunit may overheat,leading to malfunction.may damage the finish or remove the panel lettering.Do not expose this unit to direct sunlight or heat4.Powersources,because its internal temperature mayWARNINGrise,shortening the life of the optical pickup.BEFORE PLUGGING IN THE UNIT FOR THEAvoid damp and dusty places,and places subjectFIRST TIME,READ THE FOLLOWINGto vibrations from loudspeakers.Never put theSECTION CAREFULLY.unit on top of,or directly above a loudspeaker.AC outlet voltages vary from country to country.Install this unit horizontally.Never use it on itsMake sure that the voltage in your area meets theside or on a sloping surface,because it may causevoltage requirements printed on the unit's rear panela malfunction.(e.g.,AC 230 V,50 Hz or AC 120 V,60 Hz).If you install this unit near a TV,radio,or VCR,The power cord plug is used to disconnect this unitthe picture and sound quality may be affected.Iffrom the AC power source.Make sure that the plugthis occurs,move this unit away from the TV.is readily operable (easily accessible)at all times.radio.or VCRFor models with [POWER]button,or with both10.Moisture Condensation[POWER]and [ON/STANDBY]buttons:Moisture condensation may damage this unit.Pressing the [POWER]button to select OFF modeRead the following carefully:does not fully disconnect from the mains.If you doMoisture may condense on the lens of the opticalnot intend to use the unit for an extended period,pickup,one of the most important parts inside thisremove the power cord from the AC outlet.unit.For models with [ON/STANDBY]button only:Moisture condensation can occur in the followingPressing the [ON/STANDBY]button to selectsituations:Standby mode does not fully disconnect from the-The unit is moved from a cold place to a warmmains.If you do not intend to use the unit for anplace.extended period,remove the power cord from the-A heater is turned on,or cold air from an airAC outlet.conditioner is hitting the unit.5.Preventing Hearing LossIn the summer.when this unit is mowed fromCautionan air conditioned room to a hot and humidExcessive sound pressure from earphones andplace.headphones can cause hearing loss.-The unit is used in a humid place.6.Batteries and Heat ExposureDo not use this unit when there's the possibilityWarningof moisture condensation occurring.Doing soBatteries (battery pack or batteries installed)shallmay damage your discs and certain parts insidenot be exposed to excessive heat as sunshine,fire orthis unit.the like.If condensation does occur.unplug the power cord7.Never Touch this Unit with Wet Hands-Neverand leave the unit for two to three hours in the roomhandle this unit or its power cord while your handstemperature.are wet or damp.If water or any other liquid getsinside this unit,have it checked by your OnkyoThis unit contains a semiconductor laser system and isdealer.classified as a“CLASS1 LASER PRODUCT”.So,to8.Handling Notesuse this model properly,read this Instruction ManualIf you need to transport this unit,use the originalcarefully.In case of any trouble,please contact the storepackaging to pack it how it was when youwhere you purchased the unitoriginally bought it.To prevent being exposed to the laser beam,do not try toDo not leave rubber or plastic items on this unitopen the enclosure.for a long time,because they may leave marks onCAUTION:the case.CLASS IM VISIBLE AND INVISIBLE LASERThis unit's top and rear panels may get warmRADIATION WHEN OPEN.DO NOT VIEWafter prolonged use.This is normal.DIRECTLY WITH OPTICAL INSTRUMENTS.3Precautions-ContinuedTHIS PRODUCT UTILIZES A LASER.USE OFCONTROLS OR ADJUSTMENTS ORPERFORMANCE OF PROCEDURES OTHER THANWARNINGTHOSE SPECIFIED HEREIN MAY RESULT INHAZARDOUS RADIATION EXPOSURE.DO NOT INGEST BATTERY,CHEMICAL BURNThe label on the right isHAZARDapplied on the rear panel.CLASS 1 LASERPRODUCT[The remote control supplied with]This product1.This unit is a CLASS Icontains a coin/button cell battery.If the coin/button cellLASER PRODUCT andbattery is swallowed,it can cause severe internal burnsemploys a laser inside the cabinet.in just 2 hours and can lead to death.2.To prevent the laser from being exposed,do notremove the cover.Refer servicing to qualifiedKeep new and used batteries away from children.If thepersonnel.battery compartment does not close securely.stop usingthe product and keep it away from children.For British modelsReplacement and mounting of an AC plug on the powerIf you think batteries might have been swallowed orsupply cord of this unit should be performed only byplaced inside any part of the body,seek immediatequalified service personnel.medical attentionIMPORTANTThe wires in the mains lead are coloured in accordanceCAUTION:with the following code:Danger of explosion if battery is incorrectly replaced.Blue:NeutralReplace only with the same or equivalent type.Brown:LiveAs the colours of the wires in the mains lead of thisapparatus may not correspond with the colouredmarkings identifying the terminals in your plug.proceed as follows:The wire which is coloured blue must be connected tothe terminal which is marked with the letter N orcoloured black.The wire which is coloured brown must be connected tothe terminal which is marked with the letter L orcoloured red.IMPORTANTThe plug is fitted with an appropriate fuse.If the fuseneeds to be replaced,the replacement fuse mustapproved by ASTA or BSI to BS1362 and have the sameampere rating as that indicated on the plug.Check forthe ASTA mark or the BSI mark on the body of the fuseIf the power cord's plug is not suitable for your socketoutlets,cut it off and fit a suitable plug.Fit a suitablefuse in the plug.For European ModelsDeclaration of ConformityWe declare,under our soleresponsibility,that this productcomplies with the standards:-Safety-Limits and methods ofmeasurement of radio disturbance characteristics-Limits for harmonic current emissions-Limitation of voltage changes,voltage fluctuationsand flicker-RoHS Directive,2011/65/EU4Precautions-ContinuedBefore Using Your New SpeakersPlace the speakers on sturdy,flat surfaces.Puttingthem on uneven or unstable surfaces where they mayfall and cause damage will affect the sound quality.Do not keep water or other liquids close to thespeakers.If a liquid is spilled over them,the wooferand tweeter inside may be damaged.Do not handle the speakers with wet or damp hands.Speaker PrecautionsThe speakers can handle the specified input power whenused for normal music reproduction.If they're fed anyof the following signals,even if the input power iswithin the specified rating.excessive current may flowin the speaker coils.causing burning or wire breakage:1.Interstation noise from an untuned FM radio2.Audio from a cassette that's being fast-forwarded.3.High-pitched sounds generated by an oscillator,elec-tronic musical instrument,and so on.4.Amplifier oscillation.5.Special test tones from audio test CDs and so on.6.Thumps and clicks caused by connecting or discon-necting audio cables(always turn off your amplifierbefore connecting or disconnecting cables).7.Microphone feedback.The speakers contain powerful magnets.Do not putmetal items,such as screwdrivers,close to the speakers,as they may be attracted toward the magnet.causinginjury.or damage to the tweeter diaphragm.Using Close to a TV or ComputerTVs and computer monitors are magnetically sensitivedevices and as such are likely to suffer fromdiscoloration or picture distortion when conventionalspeakers are placed nearby.To prevent this,the speakersfeature internal magnetic shielding.In some situations.however,discoloration may still be an issue.In thiscase,turn off your TV or monitor,wait 15 to 30minutes,and then turn it back on again.This normallyactivates the degaussing function,which neutralizes themagnetic field,thereby removing any discolorationeffects.If discoloration problems persist,try mowing thespeakers away from your TV or monitor.Note thatdiscoloration can also be caused by a magnet ordemagnetizing tool that's too close to your TV ormonitor.Note:If the speakers are placed close to a TV or monitor,due to the electromagnetic waves radiated by the TVor monitor,you may hear noise from the speakers evenafter your amplifier has been turned off.To preventthis,position the speakers away from your TV ormonitor.5