Hao4K影音

Connecting the power cable to an AC wall outlet,and turning on the unit1 Plug the power cable into an2 Press ((receiver power)toThe Network Setup screen shown below will beAC wall outlet.turn on the unit.displayed on the TV when the unit is tumed on forthe first time after purchase.It may take severaltens of seconds for the screen to be displayed(WAC:Wireless Accessory Configuration).To an AC waloutet3 Turn on the TV and switch the"Connecting to a network wirelessly"in theTV input to display video fromOwner's Manual when using this function toconnect the unit to a network.the unit (HDMI OUT jack).This document explains wireless connectionusing the MusicCast CONTROLLER appinstalled on your mobile device.Follow theprocedure described under"8 Setting MusicCast"NoteThis sceen will not be displayed if the unit is connectedEn 15Optimizing the speaker settings automatically(YPAO)The Yamaha Parametric room Acoustic Optimizer (YPAO)function detects speaker connections,measures the distances from them to your listening position(s),and then automatically optimizes the speaker settings,such as volume balance and acoustic parameters,to suit your room.YPAO measurementTest tones are output at highENTERYPAO MICvolume and may surprise orCursor keysfrighten small children.Test tone volume cannot beadjusted.Keep the room as quiet asRETURNFPLFPRpossible.FLFRStay in a comer of the roombehind the listening positionso that you do notbecome anobstacle between speakersand the YPAO microphone.Do not connect headphonesSWEar heightSLSRYAMAHA16En1 Turn on the subwoofer and set the volume to half.3 Use the cursor keys to select"Start"and pressIf the crossover frequency is adjustable,set it to maximum.ENTER.The measurement will start in 10 seconds.HOHCUTIt takes about 5 minutes to measure.The screen below appears on the TV when the measurement finishes.MN MAXMIN MAX2 Place the YPAO microphone at your listeningposition and connect it to the YPAO MIC jack onthe front panel.The screen below appears on the TV.NoteIf an error message (such as ERROR 1)or waming message (such asWARNING 2)appears,see"Optimizing the speaker settings automatically(YPAO)"in the Owner's Manual.4 Select"Measurement result"and press ENTER todisplay the result.After confirming the result,press RETURN to retum to the "MeasurementFinished'screen.Note5 Use the cursor keys to select“save”and pressPlace the YPAO microphone at your listening position (same height as your ears).ENTER.We recommend the use of a tripod as a microphone stand.You can use the tripod6 Disconnect the YPAO microphone from the unit.This completes optimization of the speaker settings.Setting MusicCastWhat is MusicCastUsing MusicCast CONTROLLERMusicCast is a brand new wireless musical solution from Yamaha,allowingTo use the network features on the MusicCast compatible device,you needyou to share music among all of your rooms with a variety of devices.Youcanthe dedicated app "MusicCast CONTROLLER"for the operation.Search forenjoy music from your smartphone,PC,NAS drive and music streamingthe free app"MusicCast CONTROLLER"on the App Store or Google Playservice anywhere in your house with one easy-to-use app.For more detailsand install it to your device.and a lineup of MusicCast compatible products,refer to the following site:http://www.yamaha.com/musiccast/Seamlessly control all MusicCast compatible devices with the dedicatedAdding the unit to the MusicCastapp "MusicCast CONTROLLER".networkPlay back music from music streaming services.(The compatible musicstreaming services may differ depending on your region and product.)Perform the following procedure to add the unit to the MusicCast network.Configure wireless network settings of MusicCast compatible devices.You can also configure the unit's wireless network settings at once.NoteNoteThe SSID and security key for your network will be needed1 Tap the“MusicCast CONTROLLER”appmonyour mobile device and tap "Setup".Notetap"Settings"and then"Add New Device".2 Follow the app's on-screen instructions.18 En